Magnis and Magnis Dx NGS Prep System User Guide
69
Auto Teach screen
Purpose: To run auto-teaching,
a process that locates and records the positions of the teach points that
are printed on the empty deck.
See instructions in
“Running Auto-Teaching and Teach-Point
To open: From the Home screen, press
Settings
. On the Settings screen press
Auto Teaching
.
Figure 46
Auto Teach screen
Start
Starts the auto-teaching process.
Close
This button returns you to the Settings screen.
Hardware Usage Tracking screen
Purpose: To track the usage of the system’s UV tube. For Agilent engineers and Agilent authorized
service providers, to reset the tracker following replacement of the UV tube. See instructions in
“Replacing the UV Tube and Viewing UV Tube Usage”
To open: From the Home screen, press
Settings
. On the Settings screen press
Hardware Usage
Tracking
.
NOTE
At a particular points during the auto-teaching process, the system prompts
you to perform specific actions. Monitor the touchscreen during auto-teaching
for instructions.
