Magnis and Magnis Dx NGS Prep System User Guide
64
Email alert on error occurs
Mark this check box to have the system generate an automatic email to the user when the system
encounters an error during a protocol run that was set up by that user. The email will be sent to all
email addresses entered in the Email address(es) field.
Clear this check box to discontinue sending these automatic emails to the user.
OK
This button saves any changes made on this screen.
Cancel
This button cancels any changes made on this screen and returns you to the User Management
screen.
System Settings screen
Purpose: To access tools for configuring settings that are applicable to the entire system.
To open: From the Home screen, press
Settings
. Then, press
System Settings
.
Figure 40
System Settings screen
Table 10 Settings screen buttons
Button
Description
Instrument Settings
Opens the
for viewing and/or setting the
instrument name, serial number, firmware software version, and device
version.
Date & Time Settings
Opens the
for setting the date and time of the
system.
Chiller Setting
Opens the
for setting the temperature of the chiller
module.
Connection Settings
Opens the
for configuring the IP address used
by the system when connecting to the internet.
