Agilent Technologies InfiniiVision 3000 X- Series, Advanced Training Manual, Page: 20 / 128

20 3000 X-Series Oscilloscopes Advanced Training Guide
2
Oscilloscope Familiarization Labs
You should now observe 6 positive pulses with varying widths, plus an
infrequent glitch occurring after the 6th pulse as shown in
Figure 8 . Let’s
now turn on a “+ Width” measurement.
11
Press the
[Meas]
front panel key (next to the Cursors knob).
12
Press the
Clear Meas
softkey; then press the
Clear All
softkey.
13
Press the
Type
softkey; then select the
+ Width
measurement using the
Entry knob.
14
Either push the Entry knob or press the Add Measurement softkey to
select this measurement.
Figure 8 Setting up the oscilloscope to capture a burst of digital pulses with different
pulse widths.