Agilent Technologies InfiniiVision 3000 X- Series, Advanced Training Manual, Page: 15 / 128

Oscilloscope Familiarization Labs
2
3000 X-Series Oscilloscopes Advanced Training Guide 15
20
Turn the Entry knob again until the arrow points to Minimum ; then
push the Entry knob.
Your scope’s display should now look similar to Figure 4 showing four
continuously update measurements; Frequency, Vp- p, Vmax, and Vmin,
along with statistics for each of these measurements. Let’s now perform
four different measurements.
21
Press the Clear Meas softkey; then press the Clear All softkey.
22
Set the scope’s timebase to 200.0 ns/div . Expanding on the pulse will
provide us with increased measurement resolution.
23
Now select to measure
Top
,
Base
,
Rise Time
, and
Fall Time
.
Figure 4 The scope automatically performs up to four parametric measurements.