Wireless Remote Base Unit for VS Series and G8610, G8611, or G8612 Series Leak Detectors
Page
2
of 14
Document No.
699910002
Revision
D
Operators and service personnel must be aware of all hazards associated with this equipment. They must know how to
recognize hazardous and potentially hazardous conditions, and know how to avoid them. The consequences of
unskilled, improper, or careless operation of the equipment can be serious. Every operator or service person must read
and thoroughly understand operation/maintenance manuals and any additional information provided by Agilent. All
warning and cautions must be read carefully and strictly observed. Consult local, state, and national agencies
regarding specific requirements and regulations. Address any safety, operation, and/or maintenance questions to your
nearest Agilent office.
NOTE
To clean the leak detector plastic enclosure, the LCD display and Front Panel
buttons, use only a soft cloth slightly dampened with water or a mild soap.
Do NOT use excess water or cleaning solvents of any kind.
Avoid splashing any liquids into the unit through the ventilation openings or
Front Panel buttons. Wipe the surface with a dry lint-free cloth.
CAUTION
The PCB’s are static sensitive devices. Wear a grounding strap when performing
any maintenance on these units and especially when performing maintenance of
static sensitive parts.
This manual includes two sections. The first gives instructions for installation with a VS series leak detector. The second
section gives instructions for operation with a new G8610, G8611, or G8612 series leak detector.