Wireless Remote Base Unit for VS Series and G8610, G8611, or G8612 Series Leak Detectors
Page
10
of 14
Document No.
699910002
Revision
D
Figure 2: Covers
4) Rotate the lid 90° to give better access to the area where the antenna will be installed (Figure 2: Lid).
Figure 2: Removing Valve
5) If the leak detector configuration has a valve in front of the bottom left post, move that valve aside by unscrewing
the two screws circled (Figure 2: Removing valve). Keeping the wiring connected, set valve aside. This valve is
only used on certain models of leak detectors. If the valve is not present, ignore this step.
PCB to mount to
opposite side of this
aluminum support