manualshive.com logo in svg

Agilent Technologies E8247C, User Manual

The Agilent Technologies E8247C User Manual is available for free download at manualshive.com. This comprehensive manual provides detailed instructions and guidelines to maximize your experience with the E8247C model. Accessible and user-friendly, discover the in-depth features and functionalities of this powerful device through our downloadable manual.

Share
Download
background image

Chapter 6

129

Custom Arb Waveform Generator

Working with Filters

To Create a User-Defined FIR Filter with the FIR Values Editor

In this procedure, you use the 

FIR Values

 editor to create and store an 8-symbol, windowed, sinc function 

filter with an oversample ratio of 4. The Oversample Ratio (OSR) is the number of filter coefficients per 
symbol.

You can define from 1 to 32 FIR coefficients, where the maximum combination of symbols and oversample 
ratio is 1024 coefficients.

The FIR Values editor allows a maximum filter length of 1024 coefficients, but the PSG hardware is limited 
to 512 symbols for arbitrary waveform generation, and 64 symbols for real-time waveform generation. The 
number of symbols equals the number of coefficients divided by the oversample ratio. If you enter more than 
the maximum number of symbols, the PSG cannot use the filter; it decimates the filter (throws away 
coefficients) until the required condition is met and then uses the filter, but fine resolution may be lost from 
the impulse response.

1. Press 

Preset

.

2. Press 

Mode

 > 

Custom

 > 

Arb Waveform Generator

 > 

Digital Mod Define

> 

Filter

or

Mode

 > 

Custom

 > 

Real Time I/Q Baseband

 > 

Filter

3. Press 

Define User FIR

 > 

More (1 of 2)

. 

4. Press 

Delete All Rows

> 

Confirm Delete Of All Rows

 > 

More (2 of 2)

. 

This brings up the FIR Values editor and clears the table of existing values.

5. Press 

Edit Item

.The 

Value

 field for coefficient 0 should be highlighted.

Summary of Contents for E8247C





























































































































































































































Reviews:

No comments

Related manuals for E8247C

Datavideo DAC-100 Supplementary Manual preview
DAC-100
Brand: Datavideo Pages: 13
Danfoss VLT 6000 Unpacking And Installation Instructions preview
VLT 6000
Brand: Danfoss Pages: 6
Danfoss VLT 5000 Series Quick Setup Manual preview
VLT 5000 Series
Brand: Danfoss Pages: 59
La Marche FT Series Installation And Operation Manual preview
FT Series
Brand: La Marche Pages: 18
Parkside PSE 2800 B2 Original Operation Manual preview
PSE 2800 B2
Brand: Parkside Pages: 77
Parkside PSE 2800 B2 Operation Manual preview
PSE 2800 B2
Brand: Parkside Pages: 65
Velux KSX 100 Service Instructions Manual preview
KSX 100
Brand: Velux Pages: 10
B&B Electronics McLIM TP-TX/FX User Manual preview
McLIM TP-TX/FX
Brand: B&B Electronics Pages: 13
Kramer VM-2HxI User Manual preview
VM-2HxI
Brand: Kramer Pages: 14
Enerdrive eePRO combi Installation Manual preview
eePRO combi
Brand: Enerdrive Pages: 2
Parallax TSL235R Manual preview
TSL235R
Brand: Parallax Pages: 3
Hall Research Technologies SP-HD-4A User Manual preview
SP-HD-4A
Brand: Hall Research Technologies Pages: 8
AJA Hi5-3D Installation And Operation Manual preview
Hi5-3D
Brand: AJA Pages: 29
Acromag ACC1000 Instruction Manual preview
ACC1000
Brand: Acromag Pages: 17
Ewind EW-810SFP-GE Quick Start Manual preview
EW-810SFP-GE
Brand: Ewind Pages: 3
Invertek Drives Optidrive ODP-2 User Manual preview
Optidrive ODP-2
Brand: Invertek Drives Pages: 76
REI UHD-PRO104 Manual preview
UHD-PRO104
Brand: REI Pages: 4
Mhdt Labs Canary Instruction Manual preview
Canary
Brand: Mhdt Labs Pages: 14

Brands by name

Popular brands

Load more brands