Agilent Technologies E8247C, User Manual

Page: 65 / 220

Chapter 2 55
Basic Operation
Using Data Storage Functions
Recalling an Instrument State
Using this procedure, you will learn how to recall instrument settings saved to an instrument state register.
1. Press
Preset
.
2. Press the
Recall
hardkey.
Notice that the
Select Seq
softkey shows sequence 1. (This is the last sequence that you used.)
3. Press
RECALL Reg
.
The register to be recalled in sequence 1 becomes the active function. Press the up arrow key once to
select register 1. Your stored instrument state settings should have been recalled.
Deleting Registers and Sequences
These procedures describe how to delete registers and sequences saved to an instrument state register.
Deleting a Specific Register within a Sequence
1. Press
Preset
.
2. Press the
Recall
or
Save
hardkey.
Notice that the
Select Seq
softkey shows the last sequence that you used.
3. Press
Select Seq
and enter the sequence number containing the register you want to delete.
4. Press
Select Reg
and enter the register number you want to delete.
Notice that the
Delete Seq[n] Reg[nn]
should be loaded with the sequence and register you want to delete.
5. Press
Delete Seq[n] Reg[nn]
.
This deletes the chosen register.