Agilent Technologies E5100A, Programming Manual, Page: 332 / 373

INPUTRA CBt <value1>,<value2>,<value3>
Figure G-4. The Data Output Timing Chart
MEAS1PT? <value>
Outputs measurement value at the point number specied by the parameter . When the trap
function is turn on (TRAP ON ), MEAS1PT waits to start a measurement until the phase value is in
the condition specied by INPUTRAC command, and returns the query response .
P arameter Range 1 to NOP
Query Response f valueg
Examples OUTPUT @E5100;"MEAS1PT? 10000000"
OUTPUT @E5100;"MEAS1PT?"
ENTER @E5100;A
OUTPTRA C? t<value >
Outputs the phase value to trap at a measured point and the setting of I/O port at the point
specied by the parameter . The phase value and the I/O port setting are specied by INPUTRAC
command. (Query only , Option 022 only)
P arameter Description f valueg : measurement point number
Query Response f valueg f 0j 1g
f valueg : Phase value
f 1j 0g : I/O port setting (ON/OFF)
Examples OUTPUT @E5100;"OUTPTRAC? 10"
ENTER @E5100;A,B
G-10 Option 022