Agilent Technologies E5100A, Programming Manual, Page: 195 / 373

RPLHEI?
Equivalent K ey
Sequence
4 Sweep 5
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
SWEEP TYPE MENU
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
RF OUTPUT [ ]
P arameter Description 1 : RF OUT 1
2 : RF OUT 2
Query Response f 0j 1g
Examples OUTPUT @E5100;"RFOUTSW 1"
OUTPUT @E5100;"RFOUTSW?"
ENTER @E5100;A
ROPEN t<string >
Makes a specied le read-enabled. If the le does not exist, an error occurs .
Generally , this command is used in combination with the READ? command and the CLOSE
command, as shown in Figure J-1. (No query)
P arameter Description
<string> File name of up to 12 characters including its extension
RPLENV?
Searches all sets of neighboring peaks and their included valleys for the maximum
perpendicular height from the valley minimum point included between neighboring peaks , to
the intersection of an imaginary slope line drawn between the maximum peak points of the
neighboring peaks in range specied by ANARANG , and outputs the resultant data via GPIB . F or
details , refer to \RPLENV?" in Appendix D in Appendix D. (Query only)
Query Response f valueg
Examples OUTPUT @E5100;"RPLENV?"
ENTER @E5100;A
RPLHEI?
Searches for the maximum height between neighboring ripple peaks and outputs the resultant
data via GPIB . F or details , refer to \RPLHEI?" in Appendix D in Appendix D. (Query only)
Query Response f valueg
Examples OUTPUT @E5100;"RPLHEI?"
ENTER @E5100;A
Command Reference 8-83