Agilent Technologies E5100A, Programming Manual, Page: 169 / 373

OUTPCFIL?t <value1>,<value2>, . . . , <value6>
P arameter Description <value1> : Nominal frequency (f
c
)
<value2> : Dierence vale from the maximum value (D)
<value3> : Stop frequency of rejection band (f
1
)
<value4> : Start frequency of sprious level range (f
2
)
<value5> : Relative oset value from maximum peak value to determine the
cuto point (x
1
[dB])
<value6> : Relative oset value from maximum peak value to determine the
cuto point (x
2
[dB])
.
.
.
<4 > : Relative oset value from maximum peak value to determine the
cuto point (x
n
[dB])
(2n20)
Query Response f value1gf value2g . . . f value(2n+11) g
f value1g : insertion loss
f value2g : constant loss (Loss
c
)
f value3g :x
1
dB bandwidth
f value4g :center freequency (f
cent
)
f value5g :Q
f value6g :Ripple value at the passband
f value7g :Rejection
f value8g :Spurious level
f value9g :Left pole (negative peak in the left side of the maximum value)
(P ole
x1
)
f value10 g :Stimulus value of P ole
x1
(P ole
stim1
)
f value11 g :Right pole (negative peak in the right side of the maximum value)
(P ole
x2
)
f value12 g :Stimulus value of P ole
x2
(P ole
stim2
)
f value13 g :dierence between f
c
and the left point of cuto frequency (1f
left1
)
f value14 g :dierence between f
c
and the right point of cuto frequency
(1f
righ t1
)
f value15 g :1f
left2
f value16 g :1f
righ t2
.
.
.
f 10 g :1f
left n
f 11 g :1f
righ t n
Examples OUTPUT @E5100;"OUTPCF2? 90M,0.1,90.2,3,10,12,20"
ENTER @E5100;A(10),B(*)
OUTPCFIL? t<value1 >,<value2 >, . . . , <value6 >
Outputs lter parameters within the range specied by the ANARANG command. Command
parameter sets nominal frequency , the oset of x1dB and x2dB to the maximum peak value
to determine the cuto points , same parameter with POLE? , and f
1
and f
2
for determining
rejection level and spurious level respectively . F or details , refer to Appendix D. (Query only)
Command Reference 8-57