Agilent Technologies E5100A, Programming Manual, Page: 319 / 373

4 Meas/F o rmat 5
Input P ort (AR, MEAS A, MEASR)
The following commands are used to select an input port for the 87510A . The AR , MEASA , and
MEASR commands are supported (see the following table)
T able F-1.
Equivalent Softkey 87510A E5100A
F
FFFFFFFF
A/R MEAS AR or AR MEAS AR or AR
FFFFFFFFF
B/R - MEAS BR
FFFFFFFFF
C/R - MEAS CR
F FFFFFFFF
B/A - MEAS BA
FFFFFFFFF
C/A - MEAS CA
FFFFFFFFF
R/A - MEAS RA
F FFFFFFFF
A/B - MEAS AB
FFFFFFFFF
C/B - MEAS CB
FFFFFFFFF
R/B - MEAS RB
F FFFFFFFF
A/C - MEAS AC
FFFFFFFFF
B/C - MEAS BC
FFFFFFFFF
R/C - MEAS RC
F FFF
R MEAS R or MEASR MEAS R or MEASR
F FFF
A MEAS A or MEASA MEAS A or MEASA
FFFF
B - MEAS B
F FFF
C - MEAS C
Use the MEAS? query command to conrm the current port.
OUTPUT @E5100;MEAS?
ENTER @E5100; Port$
F ormat (LOGM, PHAS , DELA, LINM, EXPP , LOGMP , LOGMD , REAL, IMA G,
POLAR)
The following commands are supported :
LOGM , PHAS , DELA , LINM , LOGMP , LOGMD , REAL , IMAG
Use the FMT EXPP command instead of EXPP for selecting Expanded Phase format. EXPP is not
supported.
P olar chart format (POLAR ) is not supported. (Refer to the following table .)
K eyword Guide to P orting F-3