Agilent Technologies E5100A, Programming Manual, Page: 117 / 373

ANARFULL
ANAPOINS? t<value>
Exchange the measurement point(1 to NOP) to the stimulus value (query only). See POIN .
P arameter Description <value> : Measurement P oint (1 to NOP)
P arameter Range <value> : 1 to NOP
Query Response f valueg
Examples OUTPUT @E5100;"ANAPOINS? 10"
ENTER @E5100;A
ANARANG t<value1 >,<value2 >
Sets the waveform analysis stimulus range by entering the ST ART (value1) and STOP (value2)
values . F or details , refer to Appendix D.
P arameter Range <value1> : 10210
3
(=10k) to 300210
6
(=300M) Hz
<value2> : 10210
3
(=10k) to 300210
6
(=300M) Hz
Query Response f value1gf value2g
Examples OUTPUT 717;"ANARANG 1000,10000"
ANARANGP t<value1 >,<value2 >
Sets the waveform analysis stimulus range by entering the point number of ST ART and point
number of STOP values .
P arameter Description <value1> : The point number of ST ART (1 to NOP)
<value2> : The point number of STOP (1 to NOP)
Query Response f value1gf value2g
Examples OUTPUT @E5100;"ANARANGP 10,100"
OUTPUT @E5100;"ANARANGP?"
ENTER @E5100;A, B
ANARFULL
Sets the analysis range equal to the full stimulus range . F or details , refer to Appendix D. (No
Query)
Command Reference 8-5