Agilent Technologies E5100A, Programming Manual, Page: 114 / 373

3 IDN?
Query Response <manufacturer > <model> <serial no .> <rmware rev .>
<manufacturer > : Agilent Technologies
<model> : E5100A
<serial no .> : serial number , such as JP5KC00101
<rmware rev .> : rmware revison number , such as REV3.00
Examples OUTPUT @E5100;"*IDN?"
ENTER @E5100;A$
3OPC
T ells the analyzer to set bit 0 (Operation Complete bit) in the Standard Event Status Register
when it completes all pending operations .
3 OPC? query places an ASCII character 1 into the analyzer's output queue when all pending
operations have been completed.
Query Response f 1g
Examples OUTPUT 717;" 3 OPC"
OUTPUT 717;" 3 OPC?"
ENTER 717;A
3PCB <value>
Species the address of a controller that is temporarily passing GPIB control to the E5100A/B .
P arameter Range 0 to 30
Query Response <value>
Examples OUTPUT @E5100;" 3 PCB 0"
3RST
Resets the E5100A/B to its initial settings . See Function R eference for more information on
default settings . (No Query)
3SRE <value>
Sets the enable bits of the status byte register .
P arameter Range 0 to 255 (decimal expression of enable bits of the status byte register)
Query Response <value>
Examples OUTPUT @E5100;" 3 SRE 1"
OUTPUT @E5100;" 3 SRE?"
ENTER @E5100;A
8-2 Command Reference