RF-Analyzer Page
PC User Interface
E1852B Operating Guide
59
RF-Analyzer Page structure
The
RF-Analyzer
page contains the following panels and entry fields:
1. Carrier
The carrier frequency can be chosen by selecting one of the 79
channels on the ISM band (channel 0 – 78 ~ 2.402 – 2.480 GHz).
Channel 40 is the mid frequency at 2.442 GHz.
2. Burst to analyze
The
RF-Analyzer
only requires the channel number to be specified if
you are making measurements on a DUT transmitting a CW signal. If
however, you want to measure a specific burst transmitted by the DUT,
you must ensure the
RF-Analyzer
is configured with the same burst
parameters. First configure the following:
•
Packet Type
- select the specific single or multi slot packet
transmitted by the DUT. The supported packet types are:
–
DH1
,
DH3
, and
DH5
•
Packet Length
- select the packet length being transmitted by the
DUT. Supported lengths are:
–
1
to
27
for
DH1
single slot packets
–
1
to
183
for
DH3
multi slot packets
–
1
to
339
for
DH5
packets.
•
Modulation
- select the modulation pattern being transmitted by the
DUT. Supported patterns are:
– BS0F
– BS33
–
BS55
E1852-90007.book Page 59 Monday, February 4, 2002 2:09 PM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
