Making Measurements
Configuring the System for Measurements
72
E1852B Operating Guide
Configuring the System for
Measurements
Getting started
Confirm all the required connections have been made between your PC
and the test set. Connect the test set to the DUT using an RF cable.
N O T E
To maintain regulatory compliance, antenna connection to the DUT
must be carried out within a screened environment. Also, an antenna
connection can introduce significant errors.
On the Windows Interface
Double click the E1852B Bluetooth Test Set icon on your PC desktop.
System
Click the
System
tab:
• Use
Inquiry
or enter the value directly to ensure the
DUT BD
address
is correct for the DUT in use.
Test Mode
To configure a Bluetooth Test Mode connection with the DUT click the
Test Mode
tab:
• Select the required Bluetooth parameters such as
Frequency
Hopping Mode
.
• Select
RF Level
of the test set.
• Select the DUT Mode –
Transmitter Test
or
Loopback
.
• Select the required
Modulation
pattern.
• Use the controls supplied for the DUT to ensure that it is setup to
make a Bluetooth test mode connection.
• Click
Page
to make a Bluetooth connection in Test Mode.
E1852-90007.book Page 72 Monday, February 4, 2002 2:09 PM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
