Introduction
Introduction
12
E1852B Operating Guide
Introduction
The E1852B Bluetooth Test Set supports a range of different tests as
specified in the Bluetooth RF Test Specifications. It is a stand-alone
piece of test equipment and can be used for high throughput
manufacturing applications, and as a development or service tool.
For some test situations specified in the Bluetooth RF Test
Specifications, additional test equipment, such as an Agilent ESA
Spectrum Analyzer or Agilent ESG Signal Generator, can be used to
compliment the E1852B bluetooth test set measurements. Consult
Agilent Technologies for further details.
The test set is basically a Bluetooth Host Controller with added test
capabilities. Used as a test set it acts as the Bluetooth master and the
Device Under Test (DUT) acts as the Bluetooth slave.
You can operate the test set using the supplied PC user interface or by
sending SCPI format commands, either in the Windows environment
or from within a test executive.
The operation of the DUT is controlled via the Air Interface. Using the
standard test mode commands, you can set the DUT into test mode and
carry out Transmitter and Loop-back Tests.
Bluetooth RF components that are unable to establish a link can be
tested using RF Analysis and RF Generator modes.
In addition to the RF IN/OUT port for connection with the DUT, several
additional front and rear panel connections are provided. These are
shown in the Installation Guide and in External Connections on page
13. With the Counter Input on the front panel, the test set can also be
used as a frequency counter, measuring system frequencies of a
Bluetooth device up to 15MHz.
E1852-90007.book Page 12 Monday, February 4, 2002 2:09 PM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
