Part # N7210 – 90006 NT 4.0 to Microsoft Windows XP Professional with Service Pack 2 Upgrade Procedure
Page 29 of 34
Printed in USA
for the license file (see the note above) and select Next. Choose the correct series
type and Select Next. Select Finish to Reboot when prompted to do so.)
56. Logon as Administrator.
57. At the Start 5DX interface, press any key to advance through a series of errors or
warnings. If you get a message from the Windows firewall about javaw (this may
happen in the middle of these errors/warning) select Unblock.
58. At the Start 5DX Interface box: At the “Logon name =” type “s”, press <ENTER>.
Scroll down to select “Quit from 5DX”, press <ENTER>. Type “exit” and press
<ENTER> to close window down properly. Press <ESC> to terminate the Agilent
Auto Reporter.
59. Insert the CD with the most recent Agilent 5DX system software patch into the new
CD RW Drive. Proceed through the following install prompts: (Select Next to
continue. Select “I accept the license agreement” and select Next. Select Install.
Select “Yes I want to restart my computer now” and select Finish.)
60. Logon as Administrator.
61. At the Start 5DX Interface, press any key to advance through a series of errors and
warnings.
62. At the Start 5DX Interface box: At the “Logon name =” type “s”, press <ENTER>.
Scroll down to select “Quit from 5DX”, press <ENTER>. Type “exit” and press
<ENTER> to close window down properly. Press <ESC> to terminate the Agilent
Auto Reporter.
63. Insert the
Agilent Technologies IPC 2.8 Install Supplement
floppy. Get to a DOS
prompt (Start>Run> type in the open box ‘cmd’ then select >Ok). Type ‘a:’ and
then press <ENTER>. Type ‘reg5dx –w <serial number> <model number>’ and
then press <ENTER>. (Fill in <serial number> with the last 3 digits of the serial
number and <model number> with the last four digits of the model number: i.e.
reg5dx –w 774 5400.) At the Computer Configured for…. prompt or at the a:\ prompt
type ‘exit’ and press <ENTER> to close the window. Eject the floppy.
Fixing Paths
64. You’ll need to fix some path issues on some of the 5DX desktop shortcuts. Follow
steps a – d for each of the shortcuts listed below:
•
Agilent 5DX Reset
•
Agilent 5DX Help
•
Image Manager
•
Logviewer
•
Magnify
a. Right-click on the shortcut.
