Agilent Technologies 4349B, Manual

Page: 94 / 233

4349B
T o Enter V oltage V alue
The following command enters the voltage value used to calculate the resistance value:
:SOUR:VOLT{1|2|3|4}
{1|2|3|4} means that one of the four numbers is attached to the root mnemonic to give the
channel number .
F or example , to enter the voltage value for the channel 1 to 100 V ,
OUTPUT 717;":SOUR:VOLT1 100"
T o Select the Measurement Range
The following commands select the measurement range:
:SENS:CURR:RANG{1|2|3|4}
:SENS:CURR:RANG{1|2|3|4}:AUTO
F or example , to select the auto range ,
OUTPUT 717;":SENS:CURR:RANG1:AUTO ON"
F or example , to set the 10 A range ,
OUTPUT 717;":SENS:CURR:RANG1:AUTO OFF"
OUTPUT 717;":SENS:CURR:RANG1 1E-5"
T o Set the Measurement Time Mode
The following command sets the measurement time:
:SENS:CURR:APER
T o set the measurement time to 10 ms ,
OUTPUT 717;":SENS:CURR:APER 0.01"
T o set the measurement time to 30 ms ,
OUTPUT 717;":SENS:CURR:APER 0.03"
T o set the measurement time to 100 ms ,
OUTPUT 717;":SENS:CURR:APER 0.1"
T o set the measurement time to 400 ms ,
OUTPUT 717;":SENS:CURR:APER 0.4"
4-6 Remote Operation