Agilent Technologies 4349B, Manual

Page: 125 / 233

4349B SENSe Subsystem
Note
This command sets [SENSe:]:CORRection[:STATe] ON , which enables the
correction function. The *RST , or :SYSTem:PRESet commands clear the
correction data.
[:SENSe]:CORRection:D A T A f1j 2j 3j 4g ? OFFSet
Returns the OPEN correction data (DC current measurement value). (query only)
Query response is a numeric value in <NR3> format.
[:SENSe]:CORRection:D A T A f1j 2j 3j 4g ? SCAP acitance
Returns the capacitance measurement data Cres which is taken in the OPEN correction and
used for the contact check function. Cres is required to nd the contact check eective range .
See Chapter 8 for more detail. (query only)
The capacitance value Cres returned by this command shows the total measurement system's
stray capacitance , including the 4349B 's internal stray capacitance .
The returned Cres is typical data, and it is not guaranteed.
Query response is a numeric value in <NR3> format.
[:SENSe]:CORRection[:ST A T e] f ON j OFF j 1 j 0 g
Sets or queries if the correction data is enabled or not.
ON , 1 Correction data is enabled.
OFF , 0 Correction function is disabled.
Query response is f 1 j 0 g .
[:SENSe]:CONT act:D A T A f1j 2j 3j 4g?
Returns the capacitance data at dut mesurement. The contact check function uses this
capacitance data. Refer to \Reading the Limit Data of Contact Check Function " in Chapter 2
for detail. (query only)
Query response is a numeric value in <NR3> format.
The data is incorrect if the measurement range was changed after dut measurement.
Note
The accuracy of the capacitance data is not guaranteed.
[:SENSe]:CONT act:LIMit f1j 2j 3 j 4g?
Returns the contact check limit data. Refer to \Reading the Limit Data of Contact Check
Function " in Chapter 2 for detail. (query only)
Query response is a numeric value in <NR3> format.
GPIB Reference 5-21