Agilent Technologies 4349B, Manual

Page: 201 / 233

4349B
Handler Interface Functional T est
The 4349B's handler interface function is tested using the built-in selftest and the handler
interface tester .
T est Equipment
Description Recommended Model
Handler Interface T ester 04339-65007
Procedure
Initial Setup .
1. Turn the 4349B OFF .
2. Set the LED PW switch on the Handler Interface T ester to OFF, and set the IN1, IN2, IN3,
and IN4 switches to 0.
3. Set up the equipment as shown in Figure 9-10
Figure 9-10. Handler Interface Functional T est Setup
4. Turn the 4349B ON.
5. Reset the 4349B using the following procedure .
a. Press to display the system reset settings .
b. Select Yes using or and press .
K ey Lock Function T est.
6. Set the IN4 switch on the Handler Interface T ester to 1.
7. Conrm that the all keys on the 4349B's front panel are locked out.
8. Set the IN4 switch on the Handler Interface T ester to 0.
External Trigger Function T est.
9. Press to set the trigger mode to External.
Maintenance 9-23