Agilent Technologies 4349B, Manual

Page: 58 / 233

4349B
Reading the Capacitance Data at DUT Measurement
1. Select the channel.
2. Press .
3. Select more using or , then press .
4. Select MeasC using or , then press .
5. The capacitance value at measured DUT is displayed.
The condition of N.C. (No Connection) is shown below .
M easC < Limit
Where
MeasC Data displayed in MeasC
Limit Data displayed in LimitC
The capacitance is not measured in the case of the contact check function is unenabled.
T o Set the Beeper Mode
T o set the beeper mode for the comparator result reporting:
1. Press .
2. Select Beep using or and press .
3. Select the desired beeper mode using or and press .
4. Select Exit using or and press .
2-10 Operating the 4349B