Agilent Technologies 4349B, Manual

Page: 133 / 233

4349B TRIGger Subsystem
TRIGger Subsystem
The TRIGger subsystem controls measurement trigger functions .
COMMAND P ARAMETER
TRIGger
:DELay <numeric value>[MSj S]
[:IMMediate]
:SOURce f BUSj EXT ernaljINT ernalj MANualg
:TRIGger:DELay <numeric value>[MS j S]
Sets or queries the trigger delay time .
<numeric value> is ,
numeric 0 to 9999 ms , 1 ms resolution. Default is 0 sec .
MAXimum 9999 ms
MINimum 0
F ollowing suxes can be used with <numeric value>.
S : s MS : ms
:TRIGger[:IMMediate]
Causes the trigger to execute a measurement, regardless of the trigger state . (No query)
:TRIGger:SOURce f BUS j EXT ernal j INT ernal j MANual g
Sets or queries the trigger mode .
BUS GET command and *TRG command trigger a single shot measurement.
EXTernal TTL pulse input of the rear panel's external trigger connector or the handler
interface trigger a measurement.
INTernal makes free running continuous measurements .
MANual The 4349B performs a measurement in response to the front-panel trigger key
being pressed.
Query response is {BUS|EXT|INT|MAN} .
GPIB Reference 5-29