Agilent Technologies 4349B, Manual

Page: 202 / 233

4349B
10. Set the measurement parameter to current (I).
a. Press .
b. Select I using or and press .
11. Press the IN5 switch on the Handler Interface T ester , and conrm that the 4349B is
triggered.
Handler Interface Output T est.
12. Start the handler interface output test with the following procedure .
a. Press to display the conguration setting menu.
b. Select Svc using or and press .
c. Select HNDL using or and press .
13. Set the LED PW switch on the Handler Interface T ester to ON.
Caution
Don't set the LED PW switch to ON, except when doing the handler interface
output test. The LEDs may cause the 4349B to shut-down during normal
operation.
14. Conrm that the LEDs on the Handler Interface T ester light in the order shown in
Figure 9-11, in accordance with the 4349B display .
Figure 9-11. Handler interface Output Order
15. Set the LED PW switch on the Handler Interface T ester to OFF .
16. Press twice to exit from the test mode .
9-24 Maintenance