Agilent Technologies 4349B, Manual

Page: 45 / 233

4349B
Using Front P anel K eys
The 4349B has four type of keys as follows:
Direct Execution Keys
T oggle Keys
Selection Keys
V alue Setup Keys
This section tells how to operate the 4349B using its front-panel keys .
Note
If you want to exit an operation and go back to the measurement display , press
several times .
Direct Execution K eys
Pressing a direct execution key will perform the pressed key's function immediately . F or
example ,
Press . The 4349B will begin the OPEN correction immediately .
T oggle K eys
Pressing a toggle key will switch between several conditions . An annunciator( 9 ) will indicate
the current condition. F or example ,
Press . The Meas Time annunciator( 9 ) points to 10 ms, 30 ms, 100 ms, or 400 ms.
Selection K eys
Pressing a selection key will display the selection display . The blinking item is the one
currently selected. By using , or the selection key itself, the item selected can be
changed.
F or example , to perform self test,
1. Press . Exit is blinking.
2. Press to select Test .
3. Press . The self test will start immediately . After the test is nished, the 4349B
displays any existing error code , and returns to the menu.
4. Press to Exit the menu.
Getting Started 1-13