Agilent Technologies 16900 Series, Service Manual

Page: 17 / 104

17
Chapter 2: Preparing for Use
mechanical defects. If you find any defects, contact your nearest Agilent
Technologies Sales Office. Arrangements for repair or replacement are made, at
Agilent Technologies' option, without waiting for a claim settlement.
To configure and install the module
Instructions for configuring and installing the module into the mainframe can be
found in the installation guide for the mainframe.
If you don’t have the installation guide for your mainframe, you can find the latest
version on the Internet at www.agilent.com.
For example: to find the installation guide for a 16900A-series mainframe, go to
www.agilent.com and enter
16900A installation guide
in the quick search box. Then
scroll down to Manuals, Guides & Notifications to find the
16900A-Series Logic
Analysis Systems Installation Guide
.
To test the module
The logic analyzer module does not require an operational accuracy calibration or
adjustment. After installing the module, you can test and use the module.
• If you require a test to verify the specifications, see the “Testing Logic Analyzer
Performance” chapter on page 19. If you require a test to verify correct module
operation using software self-tests, see “Do a self-test on the logic analysis system.” on
page 30.
• If the module does not operate correctly, see “Troubleshooting” on page 63.
To clean the module
• With the mainframe turned off and unplugged, use a cloth moistened with a mixture
of mild detergent and water to clean the rear panel.
• Do not attempt to clean the module circuit board.