AGFA DX-D 600 User Manual Download Page 14

Page: 14 / 190

DX-D 600

User Manual

0242F EN 20181218

1.3.2

RAD TABLE

Illustration 1-3
DX-D 600 RAD Table



Smooth and extra optimized elevating mechanism for outstanding
patient comfort with a large vertical travel.



Foot pedal control for RAD Table movements.



Four way floating Tabletop.



Patient safety is guaranteed with the use of electromagnetic brakes in all
moving axis. Double click action pedal avoiding any incident while patient
is unattended.



DR Detector (max. 430 x 430 mm).



Configurable automatic stops at 3 different height levels: maximum,
minimum and intermediate.



Accessories: Handgrips, Compression Band and Lateral Cassette
Holder.

The Hand grips must not be positioned in the trajectory of the
X-Ray beam.



Equipped with Emergency OFF Switch to stop the whole System in the
event of an emergency,



In the Automatic System the DR Detector is motorized allowing its
Auto-positioning and Horizontal Auto-tracking.

Note

Summary of Contents for DX-D 600































































































































































































Search results

Summary of Contents for DX-D 600

Reviews:

Related manuals for DX-D 600

Brands by name

Popular brands

AGFA DX-D 600, User Manual

Search results

Summary of Contents for DX-D 600

Reviews:

Related manuals for DX-D 600

Brands by name

Popular brands