AGFA DX-D 600 User Manual Download Page 123

Page: 123 / 190

DX-D 600

User Manual

0242F EN 20181218

115

The Holder is adjustable for height, the vertical travel of the DR Detector is
750 mm (29.5”). To move up/down the Support:

Loosen CCW the Vertical Lock Lever to free the DR Detector Support.
Hold the Support during this procedure to avoid unexpected falls.

Illustration 5-10
Vertical Lock Lever

Release the Lock

Activate the Lock

Place the Support at the desired height.

Tighten CW the Lever to fix again the Support at its new position.

The DR Detector Holder is also mobile, it is provided with four wheels and each
with its own brake pedal. To lock the wheel, step on the brake pedal.

Illustration 5-11
Wheel Brake Pedal

Summary of Contents for DX-D 600































































































































































































Search results

Summary of Contents for DX-D 600

Reviews:

Related manuals for DX-D 600

Brands by name

Popular brands

AGFA DX-D 600, User Manual

Search results

Summary of Contents for DX-D 600

Reviews:

Related manuals for DX-D 600

Brands by name

Popular brands