AGFA DX-D 600, User Manual

Page: 117 / 190

DX-D 600
User Manual
0242F EN 20181218 109
THE TABLETOP CAN ALSO MOVE FREELY IN
LONGITUDINAL AND TRANSVERSE AXES WHEN MINIMAL
FORCE IS APPLIED. IF THE PATIENT IS STILL ON THE
TABLE, HE MAY NEED HELP TO STEP DOWN FROM THE
RAD TABLE.
DO NOT TRY TO MOVE THE TABLETOP LONGITUDINALLY
NOR TRANSVERSELY WITHOUT PRESSING THE CONTROL
PEDAL. DAMAGES CAN BE CAUSED TO THE PATIENT, TO
THE OPERATOR OR TO THE EQUIPMENT.
5.2.2 VERTICAL MOVEMENTS
The vertical movements (raise and lower) of the Tabletop can be performed by
both central Control Pedals,
RAISING and LOWERING .
1. To raise / lower the RAD TABLE, press and hold the RAISING /
LOWERING Control Pedal.
2. Raise/lower the Tabletop up to the desired position. If the
maximum/minimum heights have not been reached, continue pressing it.
3. Release the Control Pedal, the Tabletop will get locked automatically.
4. The Tabletop automatically stops when:
G
The Control Pedal is released.
G
It reaches to the configured intermediate height. This height is
configured in field.
G
It reaches the maximum/minimum height.
G
An obstacle is found during Tabletop movement.
RAISING
LOWERING