AGFA DX-D 600, User Manual

Page: 136 / 190

DX-D 600
User Manual
0242F EN 20181218 128
6.6 PORTABLE DR DETECTOR LOADING
1. Using the DR Detector handle pull out the tray to insert the DR Detector.
Press and hold the handle brake until the tray is completely pulled out.
2. Insert the DR Detector to the back of the tray. Push slightly the back
end-stops with the DR Detector for the correct fixation.
Illustration 6-11
DR Detector Loading
1 2
3. Lower the DR Detector and fit it with the front End-stops.
4. Push in the tray using the handle.
6.7 USING AND MAINTAINING THE DR DETECTOR
Check the equipment daily and confirm that it works properly before use.
The action of the Air-conditioning or Heating may produce condensation in the
equipment, wait until the condensation evaporates before performing an
exposure. As a general rule, raise or lower the room temperature gradually to
avoid condensation.
During exposure, do not use the DR Detector near devices generating a strong
magnetic field.
For Wireless DR Detectors, do not cover the IR Data Port with hands or other
parts of the body and do not use the selected frequency channel (2.4 GHz band)
for other wireless devices.
After every examination, wipe with a cloth slightly damped the patient contact
surfaces as well as the handle and Grid with disinfectants such as ethanol. For
cleaning, wipe with a cloth damped in neutral detergent.
For further information on the DR Detector Handling and
Maintenance, refer to the DR Detector manuals.
Note
.