
56
76
3 Start up the HP compressor by pressing the
corresponding button. (General switch to“ON”
and then press the green button) (Fig. 76)
(left panel).
4 When the cylinder has been filled, the compressor is stopped automatically by the pressure switch.
78
77
5 Turn off the cylinder tap and that of the hoses
(Fig. 77).
6 Press the pressure bleed button on the filling
tap and then disconnect the cylinder
attachment (Fig. 78).
Auto Drains will bleed valves every 12 – 15
minutes.
When fill is complete, follow shutdown steps
1,2, 4-5.
CAUTION: DO NOT TURN ON LP COMPRESSOR FOR AIR FILLS ONLY. DOING SO CAN DAMAGE
THE MEMBRANE.
Use
Summary of Contents for MCH 14 TECH NITROX SERIES
