38
Chapter 2
www.aerotech.com
2.3.1.1. RS-422 Line Driver Encoder (Standard)
The standard encoder interface accepts an RS-422 differential quadrature line driver signal. Invalid or
missing signals will cause a feedback fault when the axis is enabled.
An analog encoder is used with the -MXH option (refer to
for more information).
Table 2-10:
Encoder Specifications
Specification
Value
Encoder Frequency
10 MHz maximum (25 nsec minimum edge separation)
x4 Quadrature Decoding
40 million counts/sec
Figure 2-11:
Line Driver Encoder Interface (J207)
Soloist HPe 150/200
Installation and Configuration
