20
Chapter 1
www.aerotech.com
1.2. Electrical Specifications
Table 1-6:
Electrical Specifications
Description
HPe 150
HPe 200
Motor
Supply
Input Voltage
240 VAC max
Input Frequency
50-60 Hz
Maximum Continuous Input
Current
43.30 A
rms
57.74 A
rms
Input Current
Refer to
Section 1.2.1. System Power Requirements
Control
Supply
Input Voltage
85-240 VAC
Input Frequency
50-60 Hz
Input Current
.25 A max
Output Voltage
(1)
340 VDC max
Peak Output Current (1 second)
150 A
200 A
Continuous Output Current
75 A
75 A
Power Amplifier Bandwidth
2500 Hz maximum (software selectable)
Power Amplifier Efficiency
85% - 95%
(2)
PWM Switching Frequency
20 kHz
Minimum Load Inductance
0.8 mH @ 160 VDC (1 mH @ 320 VDC)
User Power Supply Output
5 VDC (@ 500 mA)
Modes of Operation
Brushless; Brush; Stepper
Protective Features
Output short circuit; Peak over current, DC bus over
voltages; RMS over current; Over temperature; Control
power supply under voltage; Power stage bias supply under
voltage
Isolation
Optical and transformer isolation between control and power
stages.
(1) AC input voltage and load dependent.
(2) Dependent on total output power: efficiency increases with increasing output power.
Soloist HPe 150/200
Introduction
