9
EN
Recording
Viewing and Recording the Same Programme
1)
Insert a cassette tape with its erase-prevention tab in place.
(If necessary, rewind or fast forward the tape to the point
at which you want to begin recording.)
2)
Press the
number buttons
or
CHANNEL
(
o
/
p
) to select
the channel to be recorded.
3)
Press
SPEED/SYSTEM
to select the tape speed (SP/LP).
4)
Press
REC/OTR
to begin recording.
•The REC indicator on the VCR comes on.
5)
Press
STOP
/
L
when recording is completed.
Skipping Unwanted Programme Material During
Recording
1)
Press
PAUSE/STILL
when you want to temporarily halt
recording.
You can check the remaining pause time with
C
marks on
the TV screen. Each
C
mark represents 1 minute. After 5
minutes, the VCR will automatically switch to the Stop
mode to prevent tape damage.
2)
Press
PAUSE/STILL
or
REC/OTR
to resume recording.
Recording One Programme While Viewing Another
You can record one programme while viewing another. To
start recording, follow steps
1)
to
4)
under “Viewing and
Recording the Same Programme”. Then, set the TV to the
channel you want to watch.
To Monitor the Progress of Your Recording
Select the video channel on the TV.
Assemble Function
• You can record in continuation from previous programme
on a pre-recorded tape.
1)
Insert a pre-recorded tape. Press
PLAY
/
o
to start
playback.
2)
Press
PAUSE/STILL
at the desired point on the tape.
3)
Press
REC/OTR
. The VCR will be in the Recording Pause
mode.
4)
Press
CHANNEL
(
o
/
p
) to select the channel to be
recorded.
5)
Press
REC/OTR
or
PAUSE/STILL
. The recording will
begin.
6)
Press
STOP
/
L
when recording is completed.
Advanced Operations
Counter Memory
This feature can be used to memorize a beginning point that
you want to watch again. Rewinding or fast forwarding makes
it easy to locate this point.
Note: •
If a tape includes both programmes recorded in the
PAL system and ones recorded with NTSC system,
this function may not be operated correctly.
•
TAPE COUNTER MEMORY does not function if
the Auto Repeat mode is set to ON. In this case, set
the Auto Repeat mode to OFF.
1)
Stop the tape at the desired point.
2)
Press
TAPE COUNTER RESET
to display 0:00:00.
3)
Press
TAPE COUNTER MEMORY
so that “M” appears on
the TV screen.
4)
Press
REC/OTR
or
PLAY
/
o
.
•Press
STOP
/
L
when recording or playback is completed.
5)
Press
REW
/
s
or
F.FWD
/
B
. The VCR will automatically
stop when the counter returns to 0:00:00 (approx.).
To Exit the Counter Memory
Press
TAPE COUNTER MEMORY
so that the “M” disappears
from the TV screen.
Note:
When you set the Auto Repeat mode to ON while the
Counter Memory mode is ON, the VCR exits the
Counter Memory mode automatically.
OTR (One Touch Recording)
This function enables you to set the duration of a recording
simply by pressing
REC/OTR
.
1)
Follow steps
1)
to
3)
in “Viewing and Recording the Same
Programme” section.
2)
Press
REC/OTR
repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
Recording stops when 0:00 is reached.
• To check time remaining during an OTR
Press
DISPLAY
.
• To change the recording length during an OTR
Press
REC/OTR
repeatedly until the desired length appears.
• To stop an OTR before recording is finished
Press
STOP
/
L
.
• To cancel the OTR but continue recording
Press
REC/OTR
repeatedly until “
I
” appears without the
recording length.
Auto Repeat Playback
The VCR has an auto repeat function that allows you to repeat
a tape indefinitely without touching
PLAY
/
o
.
• Use the remote control for this procedure.
• Insert a pre-recorded tape.
1)
Press
MENU
.
2)
Press
PLAY
/
o
or
STOP
/
L
to select “SET UP”, then press
F.FWD
/
B
.
3)
Press
PLAY
/
o
or
STOP
/
L
to select “AUTO REPEAT”.
4)
Press
F.FWD
/
B
so that “ON” appears next to “AUTO
REPEAT” on the TV screen.
When in Stop mode, Auto Repeat mode will start
automatically.
If the on-screen menu still remains, press
MENU
to exit,
then press
PLAY
/
o
.
Note: •
Once you select the Auto Repeat mode, it stays in
effect even after you turn off the VCR.
•
TAPE COUNTER MEMORY does not function if
the Auto Repeat mode is set to ON.
•
When you set the Auto Repeat mode to ON while the
Counter Memory mode is ON, the VCR exit the
Counter Memory mode automatically.
To Stop Playback
Press
STOP
/
L
.
To Exit the Auto Repeat Mode
Repeat steps
1)
to
3)
. Then, press
F.FWD
/
B
.
I
I
[0:30]
I
[1:00]...
I
[7:30]
I
[8:00]
(Normal (OTR:
recording) 30 minutes)
HG210ED(EN).fm Page 9 Tuesday, March 2, 2004 4:08 PM
