Operating instructions
28
Washing machine
vibrates during opera-
tion or is unstable.
The height adjustable threa-
ded feet are not
correctly adjusted.
Adjust the feet as per the
installation and connection
instructions.
There is only very little
washing in the drum (e.g.
only a towelling dressing
gown).
Function is not impaired.
Water cannot be completely
pumped out because
the drain hose is kinked
or
the circulation pump is bloc-
ked.
Check the drain hose and if
necessary remove any kink or
clean the circulation pump
and remove any foreign
bodies from the pump hou-
sing.
Excessive foaming
during the main wash.
Probably too much detergent
was used
Dose detergent exactly in
accordance with the manu-
facturer’s instructions.
Water runs out from
under the washing
machine.
Threaded fitting on the
water inlet hose is leaking.
Tighten the water inlet hose
Drain hose is leaking.
Check drain hose and if
necessary replace.
Circulation pump cover is
not closed properly.
Close cover properly.
Washing is trapped in the
door.
Stop program, remove
washing from the door,
start a new program.
Softener is not washed
in,
w
compartment
for conditioner is full
with water.
Suction cap in the compart-
ment for conditioner is not
correctly positioned or is
blocked.
Clean detergent drawer,
place suction cap firmly in
position.
Appliance does not
spin, water in the
drum.
(RINSE HOLD)
selected.
Deselect
(RINSE HOLD)
Malfunction Possible
Cause
Remedy
