Installation and Connection Instructions
50
A special base is used to adapt the height of the appliance, this is to be
provided by the kitchen manufacturer.
Dimensions: Width x Height x Depth = 600 x 50 x 490mm.
Material: work surface 30, 33 or 40mm thick, normally coated, with
reinforcing (if possible made of solid wood) to create a platform
40-50mm high. The reinforcement should be in the form of a frame to
make it easier to compensate for unevenness in the floor. Two holes
(diameter 8-10mm) are required on the left and right for fixing the
base to the floor using plugs and screws. For safety reasons it is recom-
mended to also fit a 5-10mm high edge to the front of the base.
Technical data
Height x Width x Depth
85x60x60cm
Depth with open door
114cm
Height adjustment
approx. +10/-5mm
Weight when empty
approx. 85kg
Load (depending on the program)
max. 5kg
Area of use
Household
Wash cycle drum speed
max. 53min
-1
r.p.m.
Spin cycle drum speed
see type plate
Water pressure
1-10bar
(=10–100N/cm
2
= 0.1 – 1.0MPa)
