Operating instructions
29
Washing is not spun
properly, water is still
visible in the drum.
Drain hose is kinked.
Remove kink.
Maximum pumping height
(drain height 1m above the
floor on which the machine
is standing) exceeded.
Please contact customer
service who have a retrofit
kit for pumping to heights of
greater than 1m.
Circulation pump is blocked.
Switch off the machine and
unplug from the mains, clean
the circulation pump.
In the case of siphon con-
nection: siphon is blocked.
Clean siphon.
It is not possible to
open the door.
The door is locked for safety
reasons.
Wait 1-2 minutes after the
end of the program.
Rinse water is cloudy.
This is probably due to using
a detergent with a high sili-
cate content.
No negative impact on
the rinsing results, try using
liquid detergent.
Malfunction Possible
Cause
Remedy
