Operating instructions
17
Performing a Washing Cycle
Brief Instructions
A washing cycle is performed in the following steps:
0
1.
Open the door, load the washing.
2.
Close the door.
3.
Add detergent/conditioner.
4.
Set the correct washing program:
– Set the program on the program selector;
– Set the temperature on the temperature selector;
– In the case of easy-care washing: Press the
(EASY-CARES)
button.
5.
Press the
(ON/OFF) button.
The washing machine is switched on. The washing program starts.
6.
If necessary, change the spin speed or select rinse hold.
You can alter this setting and the temperature during the entire
washing cycle.
At the end of the washing program:
Important!
If the washing cycle ends with a rinse hold, perform either
(PUMP OUT),
(SPIN) or
(SHORT SPIN) before opening
the door.
3
For safety reasons, the door remains locked for 1-2 minutes after the
end of the program.
7.
Open thedoor, remove the washing.
8.
Press the
(ON/OFF) button.
The washing machine is switched off.
Loading the Washing
3
For maximum loads see the "Program Tables". For notes on the correct
preparation of the washing, see "Washing Types and Care Symbols".
0
1.
Sort and prepare washing according to type.
2.
Press and release the outer door in area of the sticker
on the top
left (top right for doors hinged on the left). The outer door will spring
open.
