Operating instructions
16
How much detergent and conditioner?
The required quantity depends upon:
• the amount of washing
2
If the detergent manufacturer does not include dosing instructions for
reduced loads, use one third less for half loads and only half of the full
load detergent quantity for very small loads.
• extent of soiling of the washing
• hardness of tap water
Observe instructions for use and dosing provided by the detergent and
conditioner manufacturer.
Using Water Softener
In the case of medium to very hard water (from hardness band II) water
softener should be used. Observe the manufacturer’s instructions! Then
always use detergent dosing for hardness band I (= soft). Information
on the hardness of the water in your area is provided by your local
water board.
Information on Water Hardness
Hardness Band
Water hardness in °dH
(German hardness scale)
Water hardness in mmol/l
(millimol per litre)
I – soft
0 – 7
to 1.3
II – medium-hard
7 – 14
1.3 – 2.5
III – hard
14 – 21
2.5 – 3.8
IV – very hard
greater than 21
greater than 3.8
