glass ceramic is heated by the heat of the
cookware.
The indicators / / appear when a
cooking zone is hot. They show the level of
the residual heat for the cooking zones you
are currently using.
The indicator may also appear:
• for the neighbouring cooking zones even
if you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking
zone has cooled down.
5.4 Timer
Count Down Timer
Use this function to specify how long a
roasting zone should operate during a single
cooking session.
Set the temperature for the appropriate
roasting zone and then set the function.
1. Touch to activate the function or
change the time.
The timer digits
and the indicators
and come on the display. turns red,
and turns white.
If the timer is not set, all indicators disappear
after 4 seconds.
2. Touch or to set the time (00 - 99
minutes).
After 3 seconds, the timer starts to count
down automatically. The indicators , ,
and disappear. stays red.
When the time comes to an end, a signal
sounds and
blinks. To stop the signal,
touch .
To deactivate the function: touch . The
indicators and come on. Use or
to set
on the display. Alternatively, set
the heat level to 0. As a result, a signal
sounds and the timer is cancelled.
CountUp Timer (The count up
timer)
You can use this function to monitor how
long a roasting zone operates.
Touch twice to activate the function.
The indicator turns red, the timer starts to
count up automatically.
To deactivate the function: touch . When
the indicators light up, touch .
Minute Minder
You can use this function when the appliance
is activated but the roasting zones do not
operate.
To see the control panel, place a pot on a
roasting zone.
1. Touch , until the indicator turns red,
to activate the function.
2. Touch or to set the time.
The function starts automatically after 4
seconds. The indicators , , and
disappear. stays red.
When you set the function, you can remove
the pot.
When the time comes to an end, a signal
sounds and
flashes. Touch to stop
the signal.
To deactivate the function: touch . The
indicators and light up. Use or
to set
on the display.
The function has no effect on the
operation of the roasting zone.
5.5 Lock
You can lock the control panel while the
appliance operates. It prevents an accidental
change of the temperature.
You need to activate the function
for each appliance separately.
Set the temperature first.
66
ENGLISH
Summary of Contents for ITE42600KB
Page 239: ...239 ...