AIR50-2230A Operation Manual
General safety description
VII
Attention should be paid to maintenance work.
Warning
◼
When switching on the power supply, part of the maintenance operation
is in danger of electric shock, as far as possible, the maintenance
operation should be carried out in the state of disconnecting the operator
and the system power supply; professional maintenance personnel should
be designated according to the need to carry out maintenance operation;
other personnel should be avoided to turn on the power supply when
maintaining the operation; even if the power supply must be turned on
before the operation can be carried out, the emergency stop button
should be pressed and then the operation should be carried out.
Warning
◼
Please consult our company when you need to replace the parts.
◼
The replacement of parts by the client may result in unexpected accidents,
which may cause the operator to be damaged and the operator is injured.
Warning
◼
When entering the security fence, check the whole system carefully and
make sure it is not dangerous. If there is a dangerous situation and have
to enter the fence, you must grasp the state of the system and be very
careful.
Warning
◼
If you need to replace the parts, be sure to use our designated parts. If
you use a part other than the specified part, it may cause damage to the
operator.
Warning
◼
When removing the motor and brake, the crane hoisting and other
measures should be taken to remove the motor and brake, so as to avoid
the falling of the manipulator arm.
