AIR50-2230A Operation Manual
Adaptation and connection of AIR50-2230A manipulator and
accessories
24
8.2
Connection mode
Connection between operator and accessories
The connection and load between the external auxiliary equipment and the
manipulator are similar to those of the manipulator, and can be directly or
indirectly connected to the operator through the flange.
Connection between operator and control cabinet
As described in
of this manual, the heavy-duty connector on the
operator body is connected to the control cabinet through three cables. The
definition of heavy-duty connector on the control cabinet of AIR50-2230A
operator is shown in Figure 8-4 below. For more details, please refer to the
corresponding manual of the electrical part.
Figure 8-4 The definition of AIR50-2230A cabinet cable connector
power and brake line
encoder line
main power line
