AIR50-2230A Operation Manual
General safety description
VIII
Warning
◼
When carrying out maintenance operations, when it is necessary to move
the operator as a last resort, the following matters should be taken into
account:
1.
It is important to ensure that the escape channel is smooth and that
the operation should be carried out again under the operation of the
whole system in order to avoid blockage of the retreat by the operator
and peripherals.
2.
Always pay attention to the danger around you and be prepared so
that you can press the emergency stop button at any time when you
need it.
Warning
◼
The auxiliary equipment such as the crane shall be used when the moving
motor and the speed reducer and the like have certain weight parts, so as
to avoid the excessive work load for the operators. At the same time, it is
necessary to avoid the wrong operation, otherwise, the operation and
death of the operation may be caused.
Warning
◼
Be careful not to fall because of the lubricating oil that falls on the ground,
wipe the lubricating oil that falls on the ground as soon as possible, and
eliminate the possible danger.
Warning
◼
Do not place any part of the body on any part of the manipulator during
the operation, and it is prohibited to climb on the operating machine, so
as to avoid unnecessary personal injury or adverse effect on the operating
machine.
Warning
◼
The following parts will be hot and need attention. When you have to
touch the equipment when you have to touch it in the event of heat, you
should prepare protective appliances such as heat-resistant gloves:
1.
Servo motor
