Advantech SKY-8101 User Manual Download Page 57

Page: 57 / 138

____________________________________________________________________________________________________

SKY-8101S Manual V04 20180321

Page 55

2.4.14 Power Supplies

The SKY-8101S supports 700W redundant AC and 600W redundant DC power
supplies. Technical specification for the power supply can be found in

Appendix C

2.4.14.1 AC PSU

Figure 2-21: AC PSU Details

Table 2-14: AC PSU Details

Item

Element

Description

PS1

Fan

PSU fan and air outlet area

PS2

Handle

Handle for extraction / insertion

PS3

Power
Connector

IEC 320 C-14 power connector

PS4

Lock

Lock for locking /unlocking the module. Pull left to unlock.

PS5

Status LED

Green LED indicating normal operation when lit

Amber LED indicating abnormal operation when lit

Caution!

1. DO NOT remove the PSU before unplugging the power cable (power cord).
2. For 1+1 redundant system power, only ONE PSU is allowed to be extracted

at one time.

3. DO NOT leave the slot empty when extracting the PSU, the alternative PSU

MUST be inserted immediately for safety purpose.

Summary of Contents for SKY-8101











































































































































Search results

Summary of Contents for SKY-8101

Reviews:

Brands by name

Popular brands

Advantech SKY-8101, User Manual

Search results

Summary of Contents for SKY-8101

Reviews:

Brands by name

Popular brands