manualshive.com logo in svg

Advantech SKY-8101, User Manual

Share
Download
Advantech SKY-8101 User Manual Download Page 26

____________________________________________________________________________________________________ 

SKY-8200 Manual V04 20180321 

Copyright 2016 Advantech Co. Ltd. All rights reserved. 

  Page 24

 

BIOS  will  move  through  POST  quickly  and  immediately  try  to  boot  an  OS 
according to the selected boot options in the BIOS.

 

 
In case you would extend the time the BIOS displays the POST screen and waits for a 
key  press  to  enter  the  setup  menu,  you  can  do  so  via  the  BIOS  setup  menu.  Please 
refer to

 

Section 3.2

 

for details. 

 

1.3.6 Installing an OS 

Several options are available for OS installation: 

-    System comes with a preinstalled OS 

-    Install an image from a USB key 

-    Install an OS via network boot. 

 

If you use Advantech

’s services to pre-install an OS, you can skip the following section. 

 

1.3.6.1 Pre-Installed reference OS 

 

If  you  receive  this  manual  along  with  a  sample  unit,  the  system  will  have  a  reference 
OS installed by default. The unit will be ready to boot the reference OS from the mass 
storage option selected. 

 

1.3.6.2 Installing and/or boot an OS from a USB key 

 

To boot from a USB stick: 

1.  Create a Live USB stick using LiLi (available via 

 http://www.linuxliveusb.com/

) or a 

similar tool. If you want to use a serial console, please make sure to configure the 
Linux  properly  (115200bd,  8N1,  no  handshake).  Enabling  serial  support  in  the 
Linux  bootloader  (grub  or  similar)  as  well  as  kernel  debug  messages  via  serial 
console may be valuable for potential troubleshooting. 

2.  Install the USB stick in one of the front ports. Make sure you have a serial console 

connection established via tools such as PuTTY as described earlier. 

3.  Power on the server. 

4.  The  boot  priority  in  the  SKY-8101S  BIOS  is  giving  SATA  devices  higher  priority 

than USB devices. This is a safety measure to avoid that any end user can tamper 
the unit  when  installed  in  the field  with  a bootable USB  stick.  So,  in order  to  boot 
from the USB stick, you need to enter BIOS setup. 

 

In  BIOS  setup  menu,  move  to  the

 

“Boot”

  menu.  You  can  either  give  the  USB  stick 

higher boot priority over SATA devices. Alternatively, you can select the USB stick in the

 

“Boot  Override”

  Menu.  Boot  Override  will  modify  the  boot  order  for  a  single  boot 

process only and will automatically revert back to the original boot priority. After making 
these changes leave the Setup Menu via 

“Save&Exit”

. 

 

This will restart the server and it will boot from the USB stick. 

 

Summary of Contents for SKY-8101











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands