47
MIC-3393 User Manual
Chapter 2
A
MI BIOS
Setup
2.9
Exit Options
Figure 2.25 Exit options
2.9.1
Save Changes and Exit
When you have completed the system configuration changes, follow these steps:
1.
Select Exit Saving Changes from the Exit menu and press <Enter>. The follow-
ing messages appear on the screen:
Save Configuration Changes and Exit Now?
[Ok] [Cancel]
2.
Select "Ok" to save changes and exit.
2.9.2
Discard Changes and Exit
Follow these steps to quit Setup without making any permanent changes to the sys-
tem configuration.
1.
Select Exit Discarding Changes from the Exit menu and press <Enter>. The fol-
lowing messages appear on the screen:
Discard Changes and Exit Setup Now?
[Ok] [Cancel]
2.
Select "Ok" to discard changes and exit. The following messages appear on the
screen:
Discard Changes
3.
Select "Discard Changes" from the Exit menu and press <Enter>.
2.9.3
Discard Changes
Discard changes done so far to any of the setup questions.
2.9.4
Load Optimal Defaults
This loads the optimal defaults values for the MIC-3393 which allows optimum func-
tionality and system performance. Select "Load Optimal Defaults" from the Exit menu
and press <Enter>.
Summary of Contents for MIC-3393
