MIC-3393 User Manual
30
2.4.3
IDE Configuration
Figure 2.7 IDE configuration
2.4.3.1
SATA#1 Configuration
Three options are available: Disabled, Compatible or Enhanced. "Disabled" means
that all SATA resources are disabled. "Compatible" enables up to two SATA channels
for OS's requiring legacy IDE operation (default setting). And, "Enhanced" enables all
SATA resources. The default setting is "Compatible".
2.4.3.2
Configure SATA#1 as
Three options are available: "IDE", "RAID" and "AHCI". The default setting is "IDE".
2.4.3.3
SATA#2 Configuration
Two options are available: Disabled or Enhanced. The default setting is "Enhanced".
2.4.3.4
Primary/Secondary/Third/Fourth IDE Master and Slave
While entering setup, BIOS auto detects the presence of IDE devices. This displays
the status of auto detection of four possible IDE devices.
2.4.3.5
Hard Disk Write Protect
Disable or enable device write protection. Enable effectively only if device is
accessed through BIOS. This option only functions under DOS. The default setting
for this item is set to "Disabled".
2.4.3.6
IDE Detect Time Out (Sec)
Select the time out value for detecting ATA/ATAPI devices. The default setting for this
item is set to "35".
Summary of Contents for MIC-3393
