Advantech MIC-3393, User Manual

Page: 14 / 86

MIC-3393 User Manual 4
1.2.5 Memory
The MIC-3393 has 2GB of on-board ECC DDR2 SDRAM. It also has two 200-pin
SO-DIMM sockets that can accommodate an additional 2GB of memory. The follow-
ing table shows a list of SORDIMM modules that have been tested on the MIC-3393.
1.2.6 Ethernet
The MIC-3393 uses two Intel 82574L LAN controllers to provide 10/100/1000 Mbps
Ethernet connectivity (LAN1/ LAN2 or PICMG2.16) and one Intel 82566DM LAN con-
troller which is an external PHY chip built in ICH9R to provide 10/100/1000 Mbps
Ethernet connectivity (LAN3). Optional settings for the source of the Gigabit Ethernet
ports can be selected in the BIOS menu. These are mutually exclusive and can be
set as:
! LAN1/LAN2 of Front I/O (on the MIC-3393)
! LAN1/LAN2/LAN3 of Rear I/O (on the RTM)
! PICMG 2.16
User can access LAN1 via front panel or rear I/O. LAN2 is accessible via front panel,
rear I/O or PICMG 2.16 on backplane. LAN3 can be connected to rear I/O or PICMG
2.16 on backplane. See figure 1.1 for the configuration.
Figure 1.1 MIC-3393 Ethernet Ports Configuration
Table 1.3: DDR2 200 Pin Registered SO-RDIMM Tested on the MIC-3393
Advantech PN Brand Vendor PN Size Speed Depth / Width Memory Chip
96SD2-
1G667ER-VI Virtium VL493T2863C-E6M 1 GB DDR2 667
(PC2-5300)
128Mb x8 Micron
96SD2-
1G667ER-VI1 Virtium VL493T2863C-E6S 1 GB DDR2 667
(PC2-5300)
128Mb x8 Samsung
Note! Use of single rank, dual die package stack (3.8mm) SORDIMM is
advised.