MIC-3393 User Manual
38
2.4.11
Remote Access Configuration
Figure 2.16 Remote access configuration
2.4.11.1
Remote Access
You can disable or enable the BIOS remote access feature here. The default setting
is "Enabled".
2.4.11.2
Serial Port Number
Select the serial port you want to use for console redirection. You can set the value
for this option to either SIO COM1 or COM2. The default setting is SIO COM1.
2.4.11.3
Serial Port Mode
Select the baud rate you want to use for console redirection. The default setting is
"115200 8, n, 1".
2.4.11.4
Flow Control
Select Flow Control for console redirection. The default setting is "None".
2.4.11.5
Redirection after BIOS POST
Three options are available: Disabled, Boot Loader or Always. "Disabled" will turn off
the redirection after POST. "Boot Loader" means that redirection is active during
POST and during boot loader. And, "Always" means that redirection is always active.
However, some OS may not work even set to Always.
2.4.11.6
Terminal Type Combo Key Support
Select the target terminal type.
2.4.11.7
VT-UTF8
Enable or disable VT-UTF8 combination key support for ANSI/VT100 terminals.
2.4.11.8
Serial Over LAN
Enable or disable Serial over LAN (SOL) function. The default setting is "Disabled".
Summary of Contents for MIC-3393
