1.1. Electrical Specifications
Table 1-2:
Electrical Specifications
Description
-10 Option
-20 Option
-30 Option
Motor Supply
Input Voltage
0-240 VAC
Input Frequency
50-60 Hz
Inrush Current
34 A
pk
@ 240 V
Maximum
Continuous Input
Current
5 A
rms
10 A
rms
10 A
rms
Input Current
Refer to
Section 1.1.1. System Power Requirements
Control Supply
Input Voltage
100-240 VAC
Input Frequency
50-60 Hz
Inrush Current
68 A
pk
@ 240 V
Input Power
10 W
Output Voltage
(1)
340 VDC
Peak Output Current (1 second)
(3)
10 A
20 A
30 A
Continuous Output Current
(3)
5 A
10 A
10 A
Power Amplifier Bandwidth
2500 Hz maximum (software selectable)
Power Amplifier Efficiency
85% - 95%
(2)
PWM Switching Frequency
20 kHz
Minimum Load Inductance
0.1 mH @ 160 VDC (1 mH @ 320 VDC)
User Power Supply Output
5 VDC (@ 500 mA)
Modes of Operation
Brushless; Brush; Stepper
Protective Features
Output short circuit; Peak over current; DC bus over voltage;
RMS over current; Over temperature; Control power supply
under voltage; Power stage bias supply under voltage
Isolation
Optical and transformer isolation between control and
power stages.
(1) AC input voltage and load dependent.
(2) Dependent on total output power: efficiency increases with increasing output power.
(3) Current is measured as the peak amplitude in any motor phase
1.1. Electrical Specifications
XC4 Hardware Manual
20
www.aerotech.com
Summary of Contents for Automation1 XC4
